Home › Forums › Algemene discussies › Toets! iemand antwoorden (ik heb vragen)
- Dit onderwerp bevat 30 reacties, 6 deelnemers, en is laatst geüpdatet op 17 jaren, 3 maanden geleden door Yellow13NL..
- AuteurBerichten
- 15/01/2007 20:16 om 20:16 #118263
1. Which two files are required for a Windows 98 system to be successfully uninstalled? (Choose two.) UNIST.001
UNIST98.SYS
WIN.BAK
WINUNDO.DAT
WINUNDO.INI
WINUNIST.DAT
2A user has installed a new application on a PC, but it does not work properly with the installed sound device. Which approach should the user take to try to enable the application to work with the sound device?
-Use the Add Hardware Wizard to find a driver from the Windows stock drivers.
-Use the Add Hardware Wizard to load a driver from the CD-ROM provided with the device.
-Download the latest driver from the Microsoft website.
-Download the latest driver from the manufacturer website.
3A user has just finished installing Windows 98 on a PC but finds that the system will not successfully boot. The system shows the initial Windows 98 screen but progresses no further. The user reboots the system but still has the same problem. What should the user try next?
Boot from a Windows 98 startup floppy disk.
Check the cable to the hard drive.
Check the CMOS configuration.
Check that the keyboard and mouse are properly connected.
When is the FAT created in a Windows 98 system?
when a high-level format is performed
when a low-level format is performed
when a disk is partitioned
when a disk is defragmented
In Phase 1, Preparing to Run Windows 98 Setup, the setup process creates a log file to track each step of the installation process. What is the name of this log file?
INSTALL.LOG
WINSTALL.TXT
RECOVER.TXT
SETUPLOG.TXT
Which undocumented Windows 98 command is used to repair the master boot record of a disk partition?
fdisk /mbr
fixmbr
partfix
scandisk
Which type of format routine marks off the disk into sectors and cylinders and defines their placement on the disk?
quick format
high-level format
mid-level format
low-level format
A user wishes to upgrade from Windows 95 to Windows 98. Which file on the Windows 98 CD-ROM should the user run to upgrade the system?
INSTALL.EXE
SETUP.EXE
UPGRADE.EXE
WIN95298.EXE
10. A Windows ME user wishes to upgrade to Windows XP. What is the recommended upgrade procedure?
Upgrade the operating system, retaining the existing data.
Perform a clean install, removing the current operating system and data.
Back up the data, and then perform a clean install before reinstalling the data.
Defrag the disk before overwriting the current operating system with the new system.
Install the new operating system on a different disk or partition from the current system.
11. Where in Windows 9x would a user access information on the status of a print job?
right-click on the Desktop and select Printers
Start > Settings > System, select Printers from the Device Drivers tab
right-click on the Taskbar and select Printers from the Properties menu item
Start > Settings > Printers, double-click on the printer
12.Which utility allows the user to control the system startup of Windows 98 by giving quick access to CONFIG.SYS, AUTOEXEC.BAT, SYSTEM.INI, WIN.INI, and other important configuration files?
Hwinfo
Msconfig
Startup
Wscript
13.Which Windows 98 command is used to back up and repair the system registry?
regedit
register
scanreg
sysedit
14.What should be done when any new hardware is installed to ensure maximum performance?
Check that the new hardware works with every application program installed on the system.
Register the device with the supplier.
Ensure that the entry in the Windows registry is correct.
View the entry for the device in the Control Panel.
Access the manufacturer website for the latest driver.
15. A PC was donated to a charity, with a 486DX 66-MHz processor with 32 MB of RAM, a 160-MB hard drive, and a monitor with a maximum resolution of 800 x 600. The charity can afford to upgrade one component of the PC. Which component is most essential to upgrade in order to successfully run Windows 98?
hard drive
monitor
processor
RAM
16 How is a device that has been disabled shown in the Control Panel?
The device will no longer appear in the Control Panel.
The device will have an exclamation mark (!) next to it.
The device will have an X next to it.
The device will have a question mark (?) next to it.
The device will be shown in gray rather than black type.
17 What is the name of the hierarchical database containing all of the information needed by the Windows operating system?
Registry
Windows Explorer
Device Manager
CONFIG.SYS
HWINFO.EXE
18 Which three files make up the registry in a Windows 98 system? (Choose three.)
AUTOEXEC.BAT
CONFIG.SYS
POLICY.POL
SYSTEM.DAT
USER.DAT
WIN.INI
19 Which utility is used to skip a driver when the operating system fails during bootup?
WSCRIPT.EXE
HWINFO.EXE
ASD.EXE
SCANDISK.EXE
20 Where in Windows 9x would a user access information on the status of a print job?
right-click on the Desktop and select Printers
Start > Settings > System, select Printers from the Device Drivers tab
right-click on the Taskbar and select Printers from the Properties menu item
Start > Settings > Printers, double-click on the printer
21 A hard drive is divided into chunks of 512 bytes each. Which term describes these chunks?
clusters
tracks
cylinders
sectors
22 A user wishes to upgrade from Windows 95 to Windows 98. Which file on the Windows 98 CD-ROM should the user run to upgrade the system?
INSTALL.EXE
SETUP.EXE
UPGRADE.EXE
WIN95298.EXE
^^
15/01/2007 20:19 om 20:19 #461671wat voor toets is het en wat heeft het voor nut :X 15/01/2007 20:19 om 20:19 #455551wat voor toets is het en wat heeft het voor nut :X 15/01/2007 20:19 om 20:19 #455654wat voor toets is het en wat heeft het voor nut :X 15/01/2007 20:21 om 20:21 #461674ik heb hem morgen xD 15/01/2007 20:21 om 20:21 #455553ik heb hem morgen xD 15/01/2007 20:21 om 20:21 #455656ik heb hem morgen xD 15/01/2007 20:24 om 20:24 #461677jezus ga is naar een andere school ofzo… (en val ons niet lastig met simpele vragen die jij moet weten) windows 98 is outdated als maar kan… is totaal niet netwerk veilig en het gebruik ervan is minimaal…
of je moet voor een speciale M$ support dingetje leren ofzo… of je moet is echt met wat docenten op ej school gaan praten…
15/01/2007 20:24 om 20:24 #455555jezus ga is naar een andere school ofzo… (en val ons niet lastig met simpele vragen die jij moet weten) windows 98 is outdated als maar kan… is totaal niet netwerk veilig en het gebruik ervan is minimaal…
of je moet voor een speciale M$ support dingetje leren ofzo… of je moet is echt met wat docenten op ej school gaan praten…
15/01/2007 20:24 om 20:24 #455658jezus ga is naar een andere school ofzo… (en val ons niet lastig met simpele vragen die jij moet weten) windows 98 is outdated als maar kan… is totaal niet netwerk veilig en het gebruik ervan is minimaal…
of je moet voor een speciale M$ support dingetje leren ofzo… of je moet is echt met wat docenten op ej school gaan praten…
15/01/2007 20:25 om 20:25 #461680leuk maar wij krijgen momenteel alles over w98 terwijl we er helemala niet mee gaan werken 15/01/2007 20:25 om 20:25 #455557leuk maar wij krijgen momenteel alles over w98 terwijl we er helemala niet mee gaan werken 15/01/2007 20:25 om 20:25 #455660leuk maar wij krijgen momenteel alles over w98 terwijl we er helemala niet mee gaan werken 15/01/2007 20:29 om 20:29 #461683Bart, zoiets voegt niets toe aan dit topic. Heb de vragen die ik zo goed als zeker weet beantwoord, sommige vragen zijn zo weird gesteld dat je denkt: ja, en als dit nou zo is, dan kan het ook die zijn, maar goed. Ik denk dat de meestel wel correct zijn:
1. Which two files are required for a Windows 98 system to be successfully uninstalled? (Choose two.)
UNIST.001
UNIST98.SYS
WIN.BAK
WINUNDO.DAT
WINUNDO.INI
WINUNIST.DAT
2A user has installed a new application on a PC, but it does not work properly with the installed sound device. Which approach should the user take to try to enable the application to work with the sound device?
-Use the Add Hardware Wizard to find a driver from the Windows stock drivers.
-Use the Add Hardware Wizard to load a driver from the CD-ROM provided with the device.
-Download the latest driver from the Microsoft website.
-Download the latest driver from the manufacturer website.3A user has just finished installing Windows 98 on a PC but finds that the system will not successfully boot. The system shows the initial Windows 98 screen but progresses no further. The user reboots the system but still has the same problem. What should the user try next?
Boot from a Windows 98 startup floppy disk. (week niet zeker, weirde vraag, B,C en D lijken me onwaarschijnlijk)Check the cable to the hard drive.
Check the CMOS configuration.
Check that the keyboard and mouse are properly connected.
When is the FAT created in a Windows 98 system?
when a high-level format is performed
when a low-level format is performed
when a disk is partitionedwhen a disk is defragmented
In Phase 1, Preparing to Run Windows 98 Setup, the setup process creates a log file to track each step of the installation process. What is the name of this log file?
INSTALL.LOG
WINSTALL.TXT
RECOVER.TXT
SETUPLOG.TXTWhich undocumented Windows 98 command is used to repair the master boot record of a disk partition?
fdisk /mbrfixmbr
partfix
scandisk
Which type of format routine marks off the disk into sectors and cylinders and defines their placement on the disk?
quick format
high-level format
mid-level format
low-level formatA user wishes to upgrade from Windows 95 to Windows 98. Which file on the Windows 98 CD-ROM should the user run to upgrade the system?
INSTALL.EXE
SETUP.EXEUPGRADE.EXE
WIN95298.EXE
10. A Windows ME user wishes to upgrade to Windows XP. What is the recommended upgrade procedure?
Upgrade the operating system, retaining the existing data.
Perform a clean install, removing the current operating system and data.
Back up the data, and then perform a clean install before reinstalling the data.Defrag the disk before overwriting the current operating system with the new system.
Install the new operating system on a different disk or partition from the current system.
11. Where in Windows 9x would a user access information on the status of a print job?
right-click on the Desktop and select Printers
Start > Settings > System, select Printers from the Device Drivers tab
right-click on the Taskbar and select Printers from the Properties menu item
Start > Settings > Printers, double-click on the printer
12.Which utility allows the user to control the system startup of Windows 98 by giving quick access to CONFIG.SYS, AUTOEXEC.BAT, SYSTEM.INI, WIN.INI, and other important configuration files?
Hwinfo
Msconfig (niet standaard in Win 2000, als de vraag zou komen)Startup
Wscript
13.Which Windows 98 command is used to back up and repair the system registry?
regedit
register
scanregsysedit
14.What should be done when any new hardware is installed to ensure maximum performance?
Check that the new hardware works with every application program installed on the system.
Register the device with the supplier.
Ensure that the entry in the Windows registry is correct.
View the entry for the device in the Control Panel.
Access the manufacturer website for the latest driver.15. A PC was donated to a charity, with a 486DX 66-MHz processor with 32 MB of RAM, a 160-MB hard drive, and a monitor with a maximum resolution of 800 x 600. The charity can afford to upgrade one component of the PC. Which component is most essential to upgrade in order to successfully run Windows 98?
hard drive
monitor
processor (eigenlijk ook de harde schijf maar goed, het kan net)RAM
16 How is a device that has been disabled shown in the Control Panel?
The device will no longer appear in the Control Panel.
The device will have an exclamation mark (!) next to it.
The device will have an X next to it.The device will have a question mark (?) next to it.
The device will be shown in gray rather than black type.
17 What is the name of the hierarchical database containing all of the information needed by the Windows operating system?
RegistryWindows Explorer
Device Manager
CONFIG.SYS
HWINFO.EXE
18 Which three files make up the registry in a Windows 98 system? (Choose three.)
AUTOEXEC.BATCONFIG.SYSPOLICY.POL
SYSTEM.DAT
USER.DAT
WIN.INI19 Which utility is used to skip a driver when the operating system fails during bootup?
WSCRIPT.EXE
HWINFO.EXE
ASD.EXESCANDISK.EXE
20 Where in Windows 9x would a user access information on the status of a print job?
right-click on the Desktop and select Printers
Start > Settings > System, select Printers from the Device Drivers tab
right-click on the Taskbar and select Printers from the Properties menu item
Start > Settings > Printers, double-click on the printer21 A hard drive is divided into chunks of 512 bytes each. Which term describes these chunks?
clusterstracks
cylinders
sectors
22 A user wishes to upgrade from Windows 95 to Windows 98. Which file on the Windows 98 CD-ROM should the user run to upgrade the system?
INSTALL.EXE
SETUP.EXEUPGRADE.EXE
WIN95298.EXE
15/01/2007 20:29 om 20:29 #455559Bart, zoiets voegt niets toe aan dit topic. Heb de vragen die ik zo goed als zeker weet beantwoord, sommige vragen zijn zo weird gesteld dat je denkt: ja, en als dit nou zo is, dan kan het ook die zijn, maar goed. Ik denk dat de meestel wel correct zijn:
1. Which two files are required for a Windows 98 system to be successfully uninstalled? (Choose two.)
UNIST.001
UNIST98.SYS
WIN.BAK
WINUNDO.DAT
WINUNDO.INI
WINUNIST.DAT
2A user has installed a new application on a PC, but it does not work properly with the installed sound device. Which approach should the user take to try to enable the application to work with the sound device?
-Use the Add Hardware Wizard to find a driver from the Windows stock drivers.
-Use the Add Hardware Wizard to load a driver from the CD-ROM provided with the device.
-Download the latest driver from the Microsoft website.
-Download the latest driver from the manufacturer website.3A user has just finished installing Windows 98 on a PC but finds that the system will not successfully boot. The system shows the initial Windows 98 screen but progresses no further. The user reboots the system but still has the same problem. What should the user try next?
Boot from a Windows 98 startup floppy disk. (week niet zeker, weirde vraag, B,C en D lijken me onwaarschijnlijk)Check the cable to the hard drive.
Check the CMOS configuration.
Check that the keyboard and mouse are properly connected.
When is the FAT created in a Windows 98 system?
when a high-level format is performed
when a low-level format is performed
when a disk is partitionedwhen a disk is defragmented
In Phase 1, Preparing to Run Windows 98 Setup, the setup process creates a log file to track each step of the installation process. What is the name of this log file?
INSTALL.LOG
WINSTALL.TXT
RECOVER.TXT
SETUPLOG.TXTWhich undocumented Windows 98 command is used to repair the master boot record of a disk partition?
fdisk /mbrfixmbr
partfix
scandisk
Which type of format routine marks off the disk into sectors and cylinders and defines their placement on the disk?
quick format
high-level format
mid-level format
low-level formatA user wishes to upgrade from Windows 95 to Windows 98. Which file on the Windows 98 CD-ROM should the user run to upgrade the system?
INSTALL.EXE
SETUP.EXEUPGRADE.EXE
WIN95298.EXE
10. A Windows ME user wishes to upgrade to Windows XP. What is the recommended upgrade procedure?
Upgrade the operating system, retaining the existing data.
Perform a clean install, removing the current operating system and data.
Back up the data, and then perform a clean install before reinstalling the data.Defrag the disk before overwriting the current operating system with the new system.
Install the new operating system on a different disk or partition from the current system.
11. Where in Windows 9x would a user access information on the status of a print job?
right-click on the Desktop and select Printers
Start > Settings > System, select Printers from the Device Drivers tab
right-click on the Taskbar and select Printers from the Properties menu item
Start > Settings > Printers, double-click on the printer
12.Which utility allows the user to control the system startup of Windows 98 by giving quick access to CONFIG.SYS, AUTOEXEC.BAT, SYSTEM.INI, WIN.INI, and other important configuration files?
Hwinfo
Msconfig (niet standaard in Win 2000, als de vraag zou komen)Startup
Wscript
13.Which Windows 98 command is used to back up and repair the system registry?
regedit
register
scanregsysedit
14.What should be done when any new hardware is installed to ensure maximum performance?
Check that the new hardware works with every application program installed on the system.
Register the device with the supplier.
Ensure that the entry in the Windows registry is correct.
View the entry for the device in the Control Panel.
Access the manufacturer website for the latest driver.15. A PC was donated to a charity, with a 486DX 66-MHz processor with 32 MB of RAM, a 160-MB hard drive, and a monitor with a maximum resolution of 800 x 600. The charity can afford to upgrade one component of the PC. Which component is most essential to upgrade in order to successfully run Windows 98?
hard drive
monitor
processor (eigenlijk ook de harde schijf maar goed, het kan net)RAM
16 How is a device that has been disabled shown in the Control Panel?
The device will no longer appear in the Control Panel.
The device will have an exclamation mark (!) next to it.
The device will have an X next to it.The device will have a question mark (?) next to it.
The device will be shown in gray rather than black type.
17 What is the name of the hierarchical database containing all of the information needed by the Windows operating system?
RegistryWindows Explorer
Device Manager
CONFIG.SYS
HWINFO.EXE
18 Which three files make up the registry in a Windows 98 system? (Choose three.)
AUTOEXEC.BATCONFIG.SYSPOLICY.POL
SYSTEM.DAT
USER.DAT
WIN.INI19 Which utility is used to skip a driver when the operating system fails during bootup?
WSCRIPT.EXE
HWINFO.EXE
ASD.EXESCANDISK.EXE
20 Where in Windows 9x would a user access information on the status of a print job?
right-click on the Desktop and select Printers
Start > Settings > System, select Printers from the Device Drivers tab
right-click on the Taskbar and select Printers from the Properties menu item
Start > Settings > Printers, double-click on the printer21 A hard drive is divided into chunks of 512 bytes each. Which term describes these chunks?
clusterstracks
cylinders
sectors
22 A user wishes to upgrade from Windows 95 to Windows 98. Which file on the Windows 98 CD-ROM should the user run to upgrade the system?
INSTALL.EXE
SETUP.EXEUPGRADE.EXE
WIN95298.EXE
- AuteurBerichten
- Je moet ingelogd zijn om een antwoord op dit onderwerp te kunnen geven.